The Official MorphOS USB Boot & Installation / Update Guide

by Jacek Piszczek
Table of Contents
  1. Prerequisites
  2. Preparing the USB stick
  3. Copying the files
  4. Booting MorphOS from OpenFirmware prompt
  5. Troubleshooting FAQ
1. Prerequisites

To boot MorphOS from USB you need:

  • MorphOS compatible Apple Mac computer
  • USB mass storage device - so called USB stick. Do not use USB HDDs
  • a computer running MorphOS, Mac OS X, Linux or Windows to prepare the stick
2. Preparing the USB stick

If you already have a FAT32 formatted USB stick that contains a single partition (to verify, see if it mounts under Windows, right click the drive and select Format to see the current filesystem), you may jump to step 3 now. NOTE: this guide covers formatting the stick under MorphOS. There is a short guide on how to do that under WIndows in the FAQ below.

If you are running MorphOS, run HDConfig (found in the Tools directory), select the USB stick and make sure its partition table format is set to MBR.

Create a single partition by clicking on the "free" area. Yes, really, ONE partition. It will NOT work if you add more, if in doubt, try the stick under Windows - it will not work.

Click on the new partition and change the First Sector to '2' and Filesystem to FAT32o. Make really sure you got these right. OpenFirmware will not be able to read the USB stick otherwise!

Now save the new layout and close HDConfig. Open Ambient´s menu and open Format Disk from the Utilities menu. Quick Format the stick.

3. Copying the files

Download the MorphOS ISO that you want to install and save it as morphos.iso. Copy the ISO file to the USB stick.

Open the ISO file by double-clicking it. If you are going to install MorphOS on a G4 Mac, go to the mac_ppc32 directory. For a G5 installation, go to mac_ppc64. Copy the boot.img file to the USB stick.

4. Booting MorphOS from OpenFirmware prompt

Plug the USB stick into one of the built-in USB ports. Make sure not to plug more than ONE USB stick/hdd at once. Do NOT use USB hubs or ports from PCI USB cards, etc. While these will generally work, you will need a LOT more typing and will likely fail at booting MorphOS. This guide does not cover booting from other USB ports.

Power up or reboot your Mac. Hold the O, F, Alt and Command keys together until the OpenFirmware prompt appears. The Command key would be the key with an Apple logo or a "cmd" label on a Mac keyboard, and the Windows key on a typical PC keyboard. Paths to built-in USB ports are available in shorter form via aliases. To list the available aliases type

dev /aliases .properties
(mind the spaces, slash and the dot! dev(space)(slash)aliases(space)(dot)properties). If the command fails, try
If one of these fails, try the other one - it may depend on the OpenFirmware version.

The USB stick will show up in one of the usb0/1/2/.. aliases. To find out where the stick was mounted, type

dev usb0 ls
continue for usb1, 2, etc until you find the USB stick.

Assuming you get the result as above, the path to the boot.img file will be

That is a colon, comma and a backslash at the end, make sure you get these right! If you do not know where these keys are on your laptop keyboard, check the FAQ below.

To boot MorphOS, type

boot usb1/disk@1:,\boot.img bi umsd0:morphos.iso
and press enter. Mind the spaces, slash, backslash, comma, dots and the colon!

MorphOS will now boot in the installation/update mode! That is it :) Just make sure you do not unplug the stick before you are done updating.

5. Troubleshooting FAQ
Q: OpenFirmware does not accept the commands. What to do?

Make extra sure you get all spaces and extra characters right. OpenFirmware is case sensitive, so make sure not to use uppercase letters.
There is no backslash on my keyboard. How do I type it?

Have a look at the Apple keyboard US layout - OpenFirmware does not detect your national keyboard and uses the US layout instead.

OpenFirmware does not really support localized keyboards. It does however support a very sophisticated input so one can simulate the missing key easily. Assuming your boot command should look just like in the example above, type
" boot usb1/disk@1:,"(5C)boot.img bi umsd0:morphos.iso" cr type cr
" boot usb1/disk@1:,"(5C)boot.img bi umsd0:morphos.iso" evaluate
Note that you can easily edit the first line by using the up arrow to avoid typing everything twice. Do make sure to include the space after the first double-quote!

When trying to boot, loading the boot.img ends with an error
unrecognised Client Program format

The USB stick is not compatible with the OpenFirmware. It could for example be FAT16 formatted. Prepare the USB stick as described in Step 2 and retry.

If you are using the older PowerMac G4 machines, the USB FAT32 partition size might need to be limited to 250MB.

Which Macs does this guide apply to?

All PowerPC G4 and G5 Macs supported by MorphOS should be able to boot using this method. It had been tested with all Mac mini models, PowerMac G4 (3,5 and 3,6), PowerMac G5 (7,3), PowerBooks (5,6-5,9), iBooks (6,5) and possibly more.
I am a Windows user but I have never formatted a USB stick.

Insert the USB stick, open My Computer, right click on the USB stick icon, select Format, pick FAT32, press Start.